內窺鏡設備維修的使用，日常維護一般由使用科室和操作人員完成，它是一項每天都要進行的工作，應該制度化，它的內容應寫進操作規程和注意事項：使用科室應選派1名懂得一定儀器知識，責任心強的技術員擔任專職或兼職儀管員，協助和指導操作人員做好這一工作。日常維護工作的內容一般包括：

The use and daily maintenance of endoscope equipment maintenance are generally completed by the using department and operators. It is a daily work and should be institutionalized. Its contents should be written in the operating procedures and precautions: the using department should assign a technician who knows a certain instrument knowledge and has a strong sense of responsibility to serve as a full-time or part-time instrument controller to assist and guide the operators in this work. The contents of daily maintenance generally include:

⑴機房及儀器設備的保潔；觀察調整機房溫度、濕度穩定。

⑴ Cleaning of machine rooms and instruments; Observe and adjust the stability of temperature and humidity in the machine room.

⑵檢查機器的機械、轉動、氣路、水路，螺釘、螺母等部位是否正常。

(2) Check whether the machinery, rotation, air circuit, water circuit, screws, nuts and other parts of the machine are normal.

⑶檢查儀器表面的開關、旋鈕，指示燈、儀表及顯示參數是否正常。

(3) Check whether the switches, knobs, indicator lights, instruments and display parameters on the instrument surface are normal.

⑷正式工作前，利用儀器自檢程序檢測儀器各部分的狀態情況。

(4) Before formal work, use the instrument self inspection procedure to detect the status of each part of the instrument.

⑸注意儀器在運行過程中有否異常氣味和聲音，圖像質量是否正常。

(5) Pay attention to whether the instrument has abnormal smell and sound during operation, and whether the image quality is normal.

⑹檢查操作人員操作儀器是否符合規程，并及時糾正。

(6) Check whether the operators operate the instruments according to the regulations and correct them in time.

由于醫用內窺鏡是一種侵入式檢測工具，因此，使用醫用內窺鏡的都是進過嚴格培訓和考核的。和其他的醫療設備一樣，為了保證醫療內窺鏡設備的精準性，日常的維護保養工作是很重要的，維護保養屬于主動維修，又稱超前維修，預防性維修。

As medical endoscope is an invasive detection tool, those who use medical endoscope have received strict training and assessment. Like other medical equipment, in order to ensure the accuracy of medical endoscope equipment, daily maintenance is very important. Maintenance belongs to active maintenance, also known as advanced maintenance and preventive maintenance.

總之內窺鏡在長期使用過程中，由于種種原因，出現故障是不可避免的。故障維修仍然是設備管理和工程技術人員的一項重要工作。所以這方面需要好好進行把握住，您有相關內容就來我們網站http://www.csfqw.net咨詢！

In a word, the failure of the endoscope is inevitable due to various reasons during its long-term use. Fault maintenance is still an important work for equipment management and engineering technicians. So this aspect needs to be well handled. If you have relevant content, please come to our website http://www.csfqw.net consulting service